BGF108C 7 channel lcd filter array with esd protection data sheet, v2.0, december 2008 small signal discretes
edition 2008-12-12 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2008. all rights reserved. legal disclaimer the information given in this docu ment shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the app lication of the device, infi neon technologies hereby disclaims any and all warranties a nd liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology , delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain da ngerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safe ty or effectiveness of that device or system. life support devices or systems are intended to be implanted in the hu man body, or to support an d/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
BGF108C data sheet 3 v2.0, 2008-12-12 BGF108C revision history: 2008-12-12, v2.0 previous version:2008-10-14, v1.0 page subjects (major cha nges since last revision) all preliminary status removed
data sheet 4 v2.0, 2008-12-12 BGF108C 7 channel lcd filter array with esd protection 7 channel lcd filter array with esd protection figure 1 schematic description BGF108C is a 7 channel rc filter array to provide atte nuation of undesired signals in the 800 - 2000 mhz range. all pins are protected against esd of 15 kv according to iec61000-4-2 (contact discharge). the wafer level package is a green package with a si ze of only 1.95 mm x 2.07 mm and a to tal height of 0.60 mm. the package has been improved for incr eased drop test reliability. feature ? 7 channel integrated rc filter array ? esd protection according to iec61000-4-2 of 15 kv contact discharge on all ios ? wafer level package with snagcu solder balls ?400 m solder ball pitch ? rohs and weee co mpliant package ? improved package for increased drop test reliability type package marking chip BGF108C wlp-18-4 gf108c n0715 bgf108_schematic.vsd r1, 70 ? r2, 70 ? r3, 70 ? r4, 70 ? r5, 70 ? r6, 70 ? r7, 70 ? a1 a2 b1 c1 c2 d1 d2 a3 b3 c3 d3 a4 a5 b5 c4 c5 d4 d5
BGF108C 7 channel lcd filter array with esd protection data sheet 5 v2.0, 2008-12-12 figure 2 capacitance of one line to gnd versus dc voltage table 1 maximum ratings parameter symbol values unit note / test condition min. typ. max. voltage at all pins to gnd v p 05v operating temperature range t op -40 +85 c storage temperature range t stg -65 +150 c summed up input power for all pins p in 60 mw t s <70c electrostatic discharge according to iec61000- 4-2 1) at all pins 1) contact discharge v e -15 15 kv table 2 electrical characteristics 1) 1) at t a =25 c parameter symbol values unit note / test condition min. typ. max. series resistors r 1 ... r 10 r 56 70 84 ? leakage current of each line to gnd i r 1 2 100 1000 na v r =3v v r =5v breakdown voltage of each line to gnd v (br) 78.2 v i (br) =1ma line capacitance of each line to gnd c t 27 17 30 pf v r =0v v r =3v line capacitance BGF108C 0 5 10 15 20 25 30 01234567 voltage [v] line capacitance [pf]
data sheet 6 v2.0, 2008-12-12 BGF108C 7 channel lcd filter array with esd protection figure 3 typical filter characteristics of one filter channel ( z s = z l =50 ? , v r =0v) figure 4 typical cross talk between two filter channels ( z s = z l =50 ? , v r =0v) insertion loss BGF108C -50 -40 -30 -20 -10 0 0,1 1 10 100 1000 10000 frequency [mhz] db cross talk BGF108C -120 -100 -80 -60 -40 -20 0 0,1 1 10 100 1000 10000 frequency [mhz] s21 [db]
BGF108C 7 channel lcd filter array with esd protection data sheet 7 v2.0, 2008-12-12 package outline figure 5 package wlp-18-4 (dimensions in mm) tape and reel specification figure 6 tape for wlp-18-4 (dimensions in mm) wlp-18-1-n-po v01 2) pin a1 corner identified by marking 3) primary datum c and seating plane are defined by the spherical crowns of the balls 1) dimension is measured at the maximum solder ball diameter, parallel to primary datum c standoff 0.2 0.05 0.6 0.05 0.1 c c coplanarity 18x 0.08 seating plane c 3) corner index area pin a1 2) 4 x 0.4 = 1.6 0.4 (0.21 ) 2.02 b 0.05 0.05 (0.21 ) 0.05 (0.24 ) 0.05 (0.24 ) 0.05 0.4 3 x 0.4 = 1.2 0.05 1.68 a 0.04 0.25 1) a ?0.05 18x m b b1 b3 b5 a1 a3 a2 a4 a5 c1 c3 c2 c4 c5 d1 d3 d2 d4 d5 wlp-18-1-n-tp v01 0.1 4 corner index area pin 1 8 0.1 2.14 0.05 1.78 0.05 3? 0.25 0.71 2? 0.05
|
